Price: £16.99
Last Updated: Jan 25, 2024 14:54:36 UTC
Product Description
Pico Wi-Fi HAT is a compact and easy-to-use Wi-Fi HAT for the Raspberry Pi Pico that includes an ESP8266 module, IEEE 802.11b/g/n Wi-Fi Standard, 3.3 V Operating Voltage, UART Communication interface, and a 40-pin GPIO extension header that can be controlled via AT Command and supports TCP/UDP communication protocol.
Pico Wi-Fi HAT also includes a 1.14-inch display with a resolution of 240 x 135 pixels, 65K RGB colors, and a sharp and vivid exhibiting effect, designed primarily for user engagement via SPI connection by incorporating a GPIO header. The 1.14-inch LCD includes the ST7789 Driver and SPI Interface, decreasing the amount of IO pins required.
It’s a simple way to enable Wi-Fi on the Raspberry Pi Pico, making it suitable for a variety of IoT communication projects. It is intended for developers of all skill levels, from the most experienced to those who are just getting started with IoT devices.
Features
ESP8266 module with four-layers processStandard Raspberry Pi Pico 40-pin GPIO extension headerSupports STA, AP, and STA+AP three Wi-Fi operating modes, embedded LWIP protocol stack, supports TCP/UDP communication2x functional buttonsComes with development resources and manual
Specifications
Operating Voltage 3.3 V (Internally connected on Pico 3v3 pin) Communication UART Interface UART BAUD RATE 115200 bps Wi-Fi Standard IEEE 802.11b/g/n Frequency Range 2400 ~ 2483.5 MHz Wi-Fi Operating Mode Wi-Fi STA, Wi-Fi AP, Wi-Fi STA+AP Protocol TCP, UDP Antenna PCB Antenna Operating Temperature -40℃ ~ 85℃
Applications
Kit Content
1 x Pico Wi-Fi HAT Board
Note: Raspberry Pi Pico is not included!
Pico WiFi HAT for Raspberry Pi Pico with ESP8266 module, IEEE 802.11b/g/n WiFi Standard
Includes a 1.14-inch display with a resolution of 240 x 135 pixels
Simple way to enable WiFi on the Raspberry Pi Pico
2x functional buttons and comes with development resources and manual
Supports STA, AP, and STA+AP three Wi-Fi operating modes, embedded LWIP protocol stack, supports TCP/UDP communication
