Price: £55.99
Last Updated: Jun 30, 2023 23:23:45 UTC
Product Description
Choose your own Best Visual Angle of your GPU.
Nowadays, the graphics cards on the market are getting bigger and bigger and the appearance is very eye-catching, the new released vertical graphics card mount allows vertical installation of a GPU on any chassis to better show off the visual design of the GPU and its cooler.
Equipped with 11pcs of Addressable RGB LED lights, ARGB provides full lighting for your build, it can be synced with other 5V ARGB devices by M/B.
Bigger Graphics Card Support Verified
Supports most 1, 2, and 3 slot graphic cards.Designed for most full/mid ATX tower with at least 7 available PCI slots.Compatible with most brand’s Graphic cardPlease refer to length spec image and confirm that there is enough space of your chassis.
Equipped With PCIE4.0 Riser Cable- Cable length 6.69in/17cm
Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800.Assemble the graphics card and GPU Mount first, then adjust and lock the riser cable screw.
NOTE: Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount.
INSTALLATION GUIDE
Mount The Magnetic Feet I
Mount The Magnetic Feet II
Put On Riser Cable.
Connect GPU To The Riser Cable.
Insert the graphics card into the riser cable connector, and tighten the screws.In this step, do not mount the screw of the riser cable.
Tighten GPU screw first.
Mount the screw of riser cable and connect to motherboard PCIEx16_1 slot.
Multi-Angle Adjustment GPU mount
The adjustable GPU bracket allows to show off their GPUs and enhance cooling efficiency by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud or any metal surface.
Note:
Since this GPU bracket is designed for 1-3 PCI slots Graphics card, would be a bit bigger in dimension.
To use this bracket for a case depth of at least 14.5cm/ 5.7in.To adjust the bracket to the maximum tilt angle, Please make sure the depth of the case is at least 7.87in/20cm or more.
GPU Bracket with ARGB LED lighting effects, Synchronizable ARGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 Pin ARGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED.
The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud
Supports most 1, 2, and 3 slot graphic cards, high quality metal material increases structural toughness and supports the large graphics card on the market.
Feturing with Gen4 riser cable, supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800.
Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis.
