Price: £109.99
Last Updated: Dec 09, 2022 19:23:50 UTC
Product Description
Tailor Made for Quest 2
Designed so that your Quest 2 fits snugly on the dock while charging and can be easily picked up when you’re ready to play again.
No More Battery Swapping
Use the included rechargeable batteries and custom covers to keep your controllers charged up. And with each battery supporting up to 500 recharges, you can hugely reduce the amount of batteries you throw away.
Automatic Shut Off
Features overcharge protection to automatically turn off when your Quest 2 is fully charged.
Model Number: Y1010
Anker Charging Dock for Oculus Quest 2
Effortless Charging for Endless Adventures
Always Be Ready
With this charging dock, your Quest 2 will always be charged up and ready to go for your next gaming session.
No Fuss
Effortlessly charge your Quest 2 and Touch controllers at the same time. Just place them on the dock when you’re done playing to start charging.
Clutter Free
Instead of having your Quest 2 laying on a table with cables tangled everywhere, you can now have it neatly displayed and stored while charging.
Precision Design
Custom built to Oculus 2’s dimensions allowing for a snug fit while charging and smooth pick up when you want to play.
Superior Safety
Combines overload protection, overcharge protection, and overcurrent protection to provide safe charging to your device.
Why do the controllers feel warm when charging?
Unlike Li-ion batteries, it’s normal for Ni-MH rechargeable batteries to heat up when charging. This temperature increase is nothing to worry about as there is a built-in temperature protection feature to prevent overheating.
What should I do if temperature protection is triggered?
The built-in temperature protection automatically stops charging when the battery temperature rises above the trigger point. When charging is stopped, remove the controllers from the charging dock and let them cool down for 5-10 minutes. You do not need to remove the batteries. After the controllers have cooled down, put them back onto the charging dock to resume charging.
Why are the LEDs on the front of the charging dock blinking/flashing?
The left and right LEDs on the front of the charging dock indicate the charging status of the controllers. If one or both of them is flashing, it could be due to one of the following situations:
Charging power is less than 15W and/or there is no battery or an incorrect battery inside the controller: Please use a charger with at least a 15W output and use the included rechargeable batteries in the controllers.Temperature protection triggered: Remove the controllers and allow them to cool down for 5 to 10 minutes, then retry.A battery is not placed correctly in the controllers or the controllers are not placed correctly on the charging dock: Make sure the metal parts of the batteries are touching the controller’s contact plates and the controller’s copper plate is touching the charging dock’s pogo pin.Oxidation or dirt interfering with charging: Use a dry cloth with alcohol to clean the controller’s copper plate, the dock’s pogo pin, and the contacts of the battery.
Note:
Oculus Quest 2 and Touch controllers are not included.Not intended for use with the Oculus Elite Strap with Battery.After completing a full charge, your Anker dock will keep Quest 2 controllers slightly below a 100% charge to maximize battery life and health.If you use a protective case with your Quest 2 headset or controllers, remove it before charging.To charge the headset and controllers at the same time, use the included wall charger. Using a charger with an output of less than 15W will only charge the headset.A flashing orange light means the charging dock has stopped charging. See FAQ for full details.Do not remove the batteries if they are warm. Wait until they have cooled down before taking them out.
Batteries : 2 AA batteries required. (included)
Product Dimensions : 38 x 8.5 x 7 cm; 698.53 Grams
Date First Available : 22 Feb. 2021
Manufacturer : Anker
ASIN : B08X496JT6
Item model number : Y1010221-20
Country of origin : China
Effortless Charging: Simply place your Oculus Quest 2 headset and Touch controllers onto the dock to charge.
Officially Certified: Oculus Ready certified to work flawlessly with Oculus Quest 2.
High-Speed Charging: Fully charge your headset and controllers in just 2.5 hours.
Switch Less, Play More: Don’t waste time swapping out batteries. Use the included rechargeable batteries and custom covers to keep your controllers charged up.
What You Get: Anker Charging Dock for Oculus Quest 2, USB-C to USB-C cable, USB-C wall charger, 2 battery covers, magnetic USB-C headset connector, 2 rechargeable Ni-MH (Nickel-Metal Hydride) AA batteries, 18-month warranty, welcome guide, and friendly customer service.
