Price: £29.99
Last Updated: Jan 29, 2024 11:24:09 UTC
About This Kit:
This Raspberry Pi Pico Expansion Kit includes Raspberry Pi Pico with Pre-Soldered Header, Raspberry Pi Pico Expansion Board，
Jumper Wires, LEDs，Resistors and other accessories. The Pico Expansion Board has built-in 4x WS2812 RGB LEDs, 1x buzzer, 1x
photoresistor and 1x thermistor, the expansion board also has 18x PH2.0 sensor interfaces. Through the jumper wires we provided,
you can easily connect the sensors you need.
About Raspberry Pi Pico:
Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It incorporates Raspberry Pi’s
own RP2040 microcontroller chip, with dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM and
2MB of on-board Flash memory, as well as 26x multi-function GPIO pins.
For software development, either Raspberry Pi’s C/C++ SDK, or the MicroPython is available. There’re also complete development
resources and tutorials to help you get started easily, and integrate it into end products quickly.
Package List:
1x Raspberry Pi Pico(Pin Headers are Pre-soldered)
1x Raspberry Pi Pico Expansion Board
1x Breadboard(400 Points)
1x Jumper Wires Set(Male to Male, Flexible, 65pcs)
20x Male to Female Dupont Wirs
1x 2P PH2.0 Wires
6x 3P PH2.0 Wires
2x 4P PH2.0 Wires
2x 5P PH2.0 Wires
8x LED(Red, 5mm)
8x Resistor(220 ohm)
1x USB Cable
1x 3Pin Header
4x Copper Standoff
4x Screw
1x Screwdriver
Product Dimensions : 24.89 x 8.64 x 4.32 cm; 331 Grams
Date First Available : 26 July 2022
Manufacturer : Adeept
ASIN : B0B7BKC4KD
Item model number : ADR030-PiCo
Country of origin : China
Guaranteed software updates until : unknown
1. This Raspberry Pi Pico Expansion Kit includes Raspberry Pi Pico with Pre-Soldered Header, Raspberry Pi Pico Expansion Board, Jumper Wires, LEDs, Resistors and other accessories;
2. Raspberry Pi Pico is a low-cost, high-performance microcontroller board with flexible digital interfaces. It incorporates Raspberry Pi’s own RP2040 microcontroller chip, with dual-core Arm Cortex M0+ processor running up to 133 MHz, embedded 264KB of SRAM and 2MB of on-board Flash memory, as well as 26x multi-function GPIO pins;
3. The Pico Expansion Board has built-in 4x WS2812 RGB LEDs, 1x buzzer, 1x photoresistor and 1x thermistor, the expansion board also has 18x PH2.0 sensor interfaces. Through the jumper wires we provided, you can easily connect the sensors you need;
4. Circuit Schematics, C++/Python code are provided;
5. We provide a basic tutorial, you can visit the link on the box to download; You can also email our technical support team for quick-response technical support.
